Troubleshooting Tips; User Interface - Cisco RV345 Administration Manual

Troubleshooting Tips

VPN Status
Port Statistics
Traffic Statistics
View System Log
Troubleshooting Tips
If you have trouble connecting to the Internet or the web-based web interface:
• Verify that your web browser is not set to work offline.
• Check the local area network connection settings for your Ethernet adapter. The PC should obtain an IP
• Verify that you entered the correct settings in the Wizard to set up your Internet connection.
• Reset the modem and the device by powering off both devices. Next, power on the modem and let it sit
• If you have a DSL modem, ask your ISP to put the DSL modem into bridge mode.

User Interface

The user interface is designed to make it easy for you to set up and manage your device.
Navigation
The major modules of the web interface are represented by buttons in the left navigation pane. Click a button
to view more options. Click an option to open a page.
Popup windows
Some links and buttons launch popup windows that display more information or related configuration pages.
If your web browser displays a warning message about the popup window, allow the blocked content.
Help
To view information about the selected configuration page, click Help at the top right corner of the web
interface. If your web browser displays a warning message about the popup window, allow the blocked content.
Logout
To exit the web interface, click Logout near the top right corner of the web interface. The sign-in page appears.
RV345/345P Administration Guide
4
Directs you to the VPN Status page that displays the status of the VPNs managed
by this device.
Directs you to the Port Traffic page which displays the device's port status and
port traffic.
Directs you to the TCP/IP Services page which displays the device's port listen
status and the established connection status.
Directs you to the View Logs page which displays the logs on the device.
address through DHCP. Alternatively, the PC can have a static IP address in the 192.168.1.x range with
the default gateway set to 192.168.1.1 (the default IP address of the device).
for about 2 minutes. Then, power on the device. You should now receive a WAN IP address.
Introduction