Rv345/345P Administration Guide - Cisco RV345 Administration Manual

VPN Status
Site-to-Site Tunnel Status
• Tunnel(s) Used — VPN tunnels in use.
• Tunnel(s) Available — Available VPN tunnels.
• Tunnel(s) Enabled — VPN tunnels enabled.
• Tunnel(s) Defined — Defined VPN tunnels.
In the Connection Table, you can add, edit, delete, or refresh a tunnel. (See
can also click on Column Display Selection to select the column headers displayed in the Connection Table.
Client-to-Site Tunnel Status
In this mode, the client from Internet connects to the server to access the corporate network/LAN behind the
server. For a secure connection, you can implement a client-to-site VPN. You can view all the Client-to-Tunnel
connections, add, edit, or delete the connections in the Connection Table. (See
The Connection Table displays the following:
• Group or Tunnel Name — Name of the VPN tunnel. This is for reference purposes only and does not
match the name used at the other end of the tunnel.
• Connections — Status of the connection.
• Phase2 Encryption/Auth/Group — Phase 2 encryption type
(NULL/DES/3DES/AES-128/AES-192/AES-256), authentication method (NULL/MD5/SHA1), and
DH group number (1/2/5).
• Local Group — IP address and subnet mask of the local group.
SSL VPN Status
A Secure Sockets Layer virtual private network (SSLVPN) allows users to establish a secure, remote-access
VPN tunnel to this device by using a web browser. SSL VPN provides secure, easy access to a broad range
of web resources and web-enabled applications from almost any computer on the Internet. Here, you can view
the status of the SSL VPN tunnels.
• Tunnel(s) Used — SSL VPN Tunnels used for connection.
• Tunnel(s) available — Available tunnels for the SSL VPN connection.
The Connection Table shows the status of the established tunnels. You can also add edit or delete connections.
• Policy Name — Name of the policy applied on the tunnel.
• Session — Number of sessions.
You can also add, edit or delete a SSL VPN. (See
PPTP Tunnel Status
Point-to-Point Tunneling Protocol has the capability to encrypt data with 128-bit. It is used to ensure that
messages sent from one VPN node to another are secure.
• Tunnel(s) Used — PPTP Tunnels used for the VPN connection.

RV345/345P Administration Guide

12
Site-to-Site, on page
SSL VPN, on page 92).
Status and Statistics
80). You
Client to Site, on page 85).