Table of Contents
Advertisement
Connecting the power supply
1. Plug the female end of the power cable supplied into the Power connector on the
rear of the player.
2. Plug the male end of the cord into an AC outlet.
Turning on the power
Be sure that audio and video output has been well connected to TV.
0
0
Choose the available AV input connection on your TV set to connect ot the
DVD player.
0
Press the power on/off button on the front panel to turn on the player.
Loading discs
Press the OPEN/CLOSE button on the front of the player, the disc tray opens.
0
Load your chosen disc in the tray, with label side up (also when a double sided
0
DVD is inserted). Make sure the disc is placed properly in the correct recess.
Press OPEN/CLOSE button to close the tray, then the disc will be played
0
automatically.
Remote control battery installation
Open the battery compartment cover.
0
0
Insert two batteries inside the battery compartment as per the indicator.
Close the cover.
0
CAUTION: Don't mix old and new batteries. Never mix different types of batteries
(standard, alkaline, etc.)
Remote control operation
Unless mentioned specially, all operations can be carried out with the remote control.
0
Always point the remote control directly at the player, making sure there are no
obstructions in the path of the infrared beam.
When there are corresponding keys on the front panel, they can also be used.
0
General operation
Advertisement
Table of Contents
