Connection; General Explanation; Video Connection - Philips DVD762K Instructions For Use Manual

Dvd/supervcd/vcd/cd player
Table of Contents

Advertisement

General explanation

Video connection and Audio connection can be totally separate. That means you
0
can connect the Video output to one equipment and connect the audio output to
another with no problems. Depending on your TV and other equipment you want
to connect, there are various ways you connect the player. Possible connections
are shown in the following drawings.
Please refer to the manuals of your TV, VCR, stereo system or other devices as
0
necessary to make the best connections.
Do not connect your DVD-player via your VCR. The video quality could be distorted
0
by the copy protection system.
For better sound reproduction, conncet the player's audio out jacks to the audio in
0
jacks of your amplifier, receiver, stereo or A/V equipment. see [ Audio Connection].
Caution: Do not connect the player's audio out jack to the PHONO IN jack of your
audio system.

Video connection

Video CVBS connection
CVBS video output is the most common video format in use now, it combines
0
brightness signal and chroma signal together and only uses one cable for output.
Plugs of the cable are both yellow in color.
Connect the Video socket on the rear of the player to the corresponding socket on
0
the TV using the cable supplied.
S-Video connection.
S-video output includes two separated signals, they are brightness and chroma.
0
Reproducing high quality picture is its advantage.
Connect the S-Video connector on the rear of the player to the corresponding
0
connector on the TV using the S-Video cable (not supplied).
Component video connection (Y/C
Component video of Y/C
0
B
Y; C
; C
.
BLUE
RED
Connect the Y/C
/C
connector on the rear of the player to the corresponding
0
B
R
connector on the TV using the component video cable (not supplied).
Caution: Component video and S-video can not work at the same time, so you have
to set one of them to be active by the such way as shown on the chapter
[Video output].
/C
)
B
R
/C
format includes three component signals, they are
R

Connection

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd762k/691Dvd762k/p01Dvd762k/751

Table of Contents