Table of Contents
Advertisement
Connection
Audio connection
Connect Audio output to TV
Use the TV speaker for sound reproduction, connect the audio left and right
0
channel sockets on the player rear panel to the corresponding sockets on your
TV with the audio cable. (supplied)
MAINS
Connecting to an A/V receiver equipment
Digital multi-channel connection provides the best sound quality. For this you
0
need a multi-channel receiver that supports one or more of the audio formats
supplied by your DVD player ( Dolby Digital
the receiver manual and the logos on the front of the receiver.
Connect to A/V receiver with digital coaxial cable
Connect the player's digital coaxial output to the corresponding input on the
0
receiver using the normal audio or video cable which is supplied in the package.
You might need to set the item[ SPDIF setup] in the setup menu for adapting
0
your receiver. Please refer to the chapter [ Setup Menu] for details.
In this case, do not use the player's audio left and right output.
0
Connect to A/V receiver with digital optical cable
Connect the player's digital optical output to the corresponding input on the
0
receiver using the digital optical cable(not supplied).
You might need to set the item[ SPDIF setup] in the setup menu for adapting
0
your receiver. Please refer to the chapter [ Setup Menu] for details.
NOTE: If the audio format of the digital output does not match the capabilities
of your receiver, the sound will be muted.
Analog connection to a multi-channel A/V receiver with 6CH connectors
MAINS
This DVD player contains a multi-channel decoder. This enables playback of
0
DVDs recorded in multi-channel surround without the need of optional decoder.
Connect the audio out jacks to the coresponding jacks of your A/V receiver
with six cables. In the SPEAKER SETUP menu, select DOWNMIX to OFF
and enable the 6CH decode function by the method introduced on the chapter
[ Setup Menu ].
TM
, MPEG 2 and DTS). Check
Advertisement
Table of Contents
