Table of Contents
Advertisement
I
Charging the Battery
The battery is not charged at shipment. Charge
the battery before use.
:. Batteries
The camera uses an NP-50 rechargeable battery.
1
Place the battery in the charger.
Insert the battery into the supplied battery
charger as shown, making sure that the
battery is in the orientation indicated by the
8
G)
ffi
labels.
Charging
indicator
8CJJEB
label
Battery charger
2
Plug the charger in.
Plug the charger into a power outlet. The
charging indicator will light.
[lJ Cautions
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with
a clean, dry cloth. Failure to observe this
precaution could prevent the battery from
charging .
• Charging times increase at low temperatures.
:_ The Charging Indicator
The charging indicator shows battery charge status
as follows:
Charging indicator
pat~~rystatus
. Action
Battery not
Insert
Off
inserted.
the battery.
Battery fully
Remove
charged.
the battery.
On
Battery charging.
-
Unplug the
Blinks
Battery fault.
charger and
remove the
battery.
3
Charge the battery.
Remove the battery when charging is
complete.
:. Charging time
See specifications of the battery charger
(Owne(s
Manual,
pg. 124).
Advertisement
Table of Contents
