Page 1
Thank you for your purchase More on Photography of this product. This manual describes how to use your More on Playback FUJIFILM FinePix F80EXR digital camera and the supplied software. Be sure that you Movies have read and understood its contents before using the Connections camera.
Notes and Cautions • Read Instructions: All the safety your obsolete outlet. Do not defeat and operating instructions should the safety purpose of the polarized be read before the appliance is plug. operated. Alternate Warnings: This video • Retain Instructions: The safety and product is equipped with a 3-wire operating instructions should be grounding-type plug, a plug having...
Page 3
Power Lines: An outside antenna Never spill liquid of any kind on the system should not be located in the video product. vicinity of overhead power lines or Lightning: For added protection for other electric light or power circuits, this video product receiver during or where it can fall into such power a lightning storm, or when it is left lines or circuits.
These actions could damage the cord and cause a fire or electric shock. • If the cord is damaged, contact your FUJIFILM dealer. Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury.
Page 5
When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape.
Page 6
* When shipped, the battery is not fully charged. Always charge the battery before using it. * When carrying the battery, install it in a digital camera or keep it in the soft case. ■ Battery Features • The battery gradually loses its charge even when not used.
Page 7
• Plug the connection cord plug securely into the DC input terminal. • Turn off the FUJIFILM Digital camera before disconnecting the cord from the DC input terminal. To disconnect, pull out the plug gently. Do not pull on the cord.
Page 8
• FUJIFILM Corporation cannot accept liability for any incidental losses (such as the costs of photography or the loss of income from photography) incurred as a result of faults with this product.
About This Manual Before using the camera, read this manual and the warnings on the Basic Manual. For information on specific topics, consult the sources below. ✔ Camera Q & A ✔ Camera Q & A ..pg. x Know what you want to do but don’t know the name for it? Find the answer in “Camera Q &...
Camera Q & A Find items by task. Camera Setup How do I set the camera clock? Can I set the clock to local time when I travel? How do I keep the display from turning off automatically? How do I make the display brighter or darker? How do I stop the camera beeping and clicking? Can I change the sound the shutter makes? What are the parts of the camera called?
Taking Pictures Question Question How many pictures can I take? Is there a quick and easy way to take snapshots? How can I avoid blurred pictures? How can I make good portraits? Can I choose my own settings for different scenes? Can the camera automatically adjust settings for different scenes? Can I choose between clarity, reduced noise, and dynamic range? How can I take good pictures of dogs or cats?
Page 12
Viewing Pictures How do I view my pictures? How do I delete the current picture? Can I select other pictures for deletion? Can I zoom in on pictures during playback? How do I view a lot of pictures at once? How do I find pictures? Can I protect my pictures from accidental deletion? Can I hide the icons in the display when viewing my pictures?
Page 13
Table of Contents Notes and Cautions ... ii IMPORTANT SAFETY INSTRUCTIONS ... ii Safety Notes ... iv About This Manual ... ix Camera Q & A ... x Before You Begi Before You Begin n Introduction ... 1 Symbols and Conventions ... 1 Supplied Accessories ...
Page 14
DIGITAL ZOOM ... 100 m POWER MANAGEMENT ...101 Technical Note Technical Notes s Optional Accessories ... 102 Accessories from FUJIFILM ... 103 Caring for the Camera ... 104 Troubleshooting g Troubleshootin Troubleshooting ... 105 Warning Messages and Displays ...114...
Introduction Symbols and Conventions The following symbols are used in this manual: C Caution: This information should be read before use to ensure correct operation. A Note: Points to note when using the camera. B Tip: Additional information that may be helpful when using the camera. Menus and other text in the camera monitor are shown in bold.
Parts of the Camera For more information, refer to the page listed to the right of each item. Shutter button ...18 n button ... 11 AF-assist illuminator ...34 Self-timer lamp ...40 Lens and lens cover Microphone ...90 Flash ...37 Zoom control ...16, 42 Monitor ...
Camera Displays The following indicators may appear during shooting and playback: The indicators displayed vary with camera settings. ■ Shooting 12 / 31 / 2050 10 : 00 AM F3.3 * d: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (pg.
The Mode Dial To select a shooting mode, align the mode icon with the mark next to the mode dial. P (PROGRAM AE): Select for full control over all camera settings except shutter speed (pg. 28). Choose between program and aperture-priority AE.
Charging the Battery The battery is not charged at shipment. Charge the battery before use. Batteries The camera uses an NP-50 rechargeable battery. Place the battery in the charger. Insert the battery into the supplied battery charger as shown, making sure that the battery is in the orientation indicated by the F B E labels.
Inserting the Battery After charging the battery, insert it in the camera as described below. Open the battery-chamber cover. A Note Be sure the camera is off before opening the battery-chamber cover. C Cautions • Do not open the battery-chamber cover when the camera is on.
Page 21
Close the battery-chamber cover. Removing the Battery After turning the camera off, open the battery- chamber cover, press the battery latch to the side, and slide the battery out of the camera as shown. Battery latch C Caution Turn the camera off before removing the battery. B Tips: Using an AC Adapter •...
4 write speed (4 MB/s) or better when shooting HD movies. A complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with MultiMediaCard (MMC) or xD-Picture Cards.
Page 23
■ Inserting a Memory Card Turn the camera off, and open the battery-chamber cover. Insert the memory card firmly until you hear (feel) a click. Holding the memory card in the orientation shown below, slide it all the way in. Press firmly until it clicks into place.
Page 24
Removing Memory Cards After confirming that the camera is off, press the card in and then release it slowly. The card can now be removed by hand. C Cautions • The memory card may spring out if you remove your finger immediately after pushing the card in. •...
Turning the Camera on and off Shooting Mode Press the n button to turn the camera on. The lens will extend and the lens cover will open. Press n again to turn the camera off. B Tip: Switching to Playback Mode Press the D button for about a second to start playback.
Basic Setup A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as described below (for information on resetting the clock or changing languages, see page 96). Choose a language. START MENU ENGLISH FRANCAIS DEUTSCH ESPAÑOL...
Page 27
Choose power management options. POWER MANAGEMENT POWER SAVE QUICK AF CLEAR DISPLAY Power saving for longer battery life 3.1 Press the selector up or down to highlight one of the following options: • v POWER SAVE: Save battery power. • w QUICK AF: Reduce focusing time, ensuring a quick shutter response.
Taking Pictures in r (P AUTO) Mode This section describes how to take pictures in r (P AUTO) mode. Turn the camera on. Press the n button to turn the camera on. Select O mode. Rotate the mode dial to O. B Tip: r (P AUTO) The camera automatically selects the scene and P mode according to shooting conditions.
Page 29
Frame a picture using the zoom control. In this mode, the camera automatically analyzes the composition and selects the appropriate scene mode according to the subject and shooting conditions. The selected mode is displayed as shown below. When the shutter button is pressed halfway, the camera selects the optimal P mode, which is displayed next to the scene mode icon.
Page 30
How to use the zoom control Select B to zoom out 1.6x Zoom indicator The zoom speed can be changed by adjusting the position of the zoom control. Hold the camera steady Select A to zoom in with both hands and brace your elbows against your 7.6x sides.
Framing Guideline and Post-Shot Assist Window In shooting mode, press DISP/BACK to select a shooting display format. The selection changes each time DISP/BACK is pressed. INFORMATION ON INFORMATION OFF HD FRAMING BEST FRAMING • BEST FRAMING: To use the best framing, position the main subject at the intersection of two lines or align one of the horizontal lines with the horizon.
Page 32
Focus. Press the shutter button halfway to focus. A Note The lens may make a noise when the camera focuses. This is normal. If the camera is able to focus, it will beep twice and the indicator lamp will glow green. If the camera is unable to focus, the red colored focus frame and R will appear in the monitor, and the indicator lamp will blink...
U Silent Mode In situations in which camera sounds or lights may be unwelcome, hold the DISP/BACK button down until U is displayed (note that silent mode is not available during movie or voice memo playback). The camera speaker, flash, and AF-assist illuminator/ self-timer lamp turn off and flash and volume settings can not be adjusted (note that the flash will still fire in A mode).
Viewing Pictures Pictures can be viewed in the monitor. When taking important photographs, take a test shot and check the results. Press the D button. The most recent picture will be displayed in the monitor. 12 / 31 / 2050 12 / 31 / 2050 10 : 00 AM 10 : 00 AM 1/250...
Shooting Mode Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate the mode dial to the desired setting (pg. 4). The following modes are available: k AUTO Choose for crisp, clear snapshots. This mode is recommended in most situations.
Press the selector up or down to highlight one of the following options. Option Option The camera automatically selects the scene and P r P AUTO mode according to shooting conditions (pg. 14). s RESOLUTION Choose for crisp, clear shots. PRIORITY t HIGH ISO &...
NATURAL LIGHT L L G Capture natural light indoors, under low light, or where the flash can not be used. The flash turns off and sensitivity is raised to reduce blur. SP SCENE POSITION The camera offers a choice of “scenes,” each adapted to particular shooting conditions or a specific type of subject, which can be assigned to the SP position on the mode dial:...
Page 38
G PRO FOCUS MODE Choose for soft focusing the background of a subject such as a portrait or a flower to make it impressive. When the shutter button is pressed, the camera automatically takes up to 3 pictures and creates one image with a sharp focused subject that has a soft focused background.
Page 39
B Tip: H SAVE ORIGINAL IMAGE Select ON for the H SAVE ORIGINAL IMAGE option in the setup menu (pg. 93) to save unprocessed copies of pictures. Y DOG/T CAT When Y DOG or T CAT is selected, the camera detects and focuses the front face of a dog or cat.
Page 40
Scene Scene Choose for soft focusing the background of a subject such as a portrait or a flower to make it G PRO FOCUS impressive. F PRO LOW-LIGHT Choose for shooting a subject under low light or a still subject by using the telephoto zoom. U PORTRAIT Choose for soft-toned portraits with natural skin tones.
M MANUAL In this mode, you choose both shutter speed and aperture. If desired, exposure can be altered from the value suggested by the camera. Rotate the mode dial to M. Press the l button. Shutter speed and aperture will be displayed. Shutter speed F3.
P PROGRAM AE/A APERTURE PRIORITY AE Mode P offers a choice of program AE (autoexposure), in which the camera sets exposure automatically, and aperture priority AE, in which you adjust aperture to soften background details or bring both background and foreground into focus while letting the camera control shutter speed for optimal exposure.
Page 43
Press the selector up (l) to display exposure compensation (program AE) or aperture (aperture priority AE). Exposure compensation (program AE) (aperture priority AE) Press the selector button to choose exposure compensation (program AE) or aperture (aperture priority AE). If the correct exposure can not be achieved at the aperture selected for aperture priority AE, the shutter speed will be displayed in red.
B Intelligent Face Detection Intelligent Face Detection allows the camera to automatically detect human faces and set focus and exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group portraits (in vertical or horizontal orientations) to prevent the camera from focusing on the background.
Page 45
C Caution If no face is detected when the shutter button is pressed halfway (pg. 108), the camera will focus on the subject at the center of the display and red-eye will not be removed. Shoot. Press the shutter button all the way down to shoot.
Focus Lock To compose photographs with off-center subjects: Position the subject in the focus frame. Focus. Press the shutter button halfway to set focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). Press halfway Repeat steps 1 and 2 as desired to refocus...
Page 47
Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 32) to focus on another subject at the same distance and then recompose the photograph. •...
The AF-Assist Illuminator If the subject is poorly lit, the AF-assist illuminator will light to assist the focus operation when the shutter button is pressed halfway. A Notes • Avoid shining the AF-assist illuminator directly into your subject’s eyes. See page 93 for information on disabling the AF-assist illuminator.
5 Exposure Compensation Use exposure compensation when photographing very bright, very dark, or high-contrast subjects. Press the selector up (l). The exposure indicator will be displayed. Choose a value. Press the selector button. The effect is visible in the display. Choose positive (+) values to increase exposure Choose negative (–) values...
L Macro Mode (Close-ups) For close-ups, press the selector left (L). The selection changes each time the selector is pressed. MACRO When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the zoom control to compose pictures.
K Using the Flash (Super Intelligent Flash) When the flash is used, the camera’s Super Intelligent Flash system instantly analyzes the scene based on such factors as the brightness of the subject, its position in the frame, and its distance from the camera.
Page 52
Focus. Press the shutter button halfway to focus. If the flash will fire, X will be displayed when the shutter button is pressed halfway. At slow shutter speeds, 0 will appear in the display to warn that pictures may be blurred; use of a tripod is recommended. Shoot.
J Using the Self-Timer The camera offers a ten-second timer that allows photographers to appear in their own photographs, and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter button is pressed. The self-timer is available in all shooting modes. Set the timer.
Page 54
The self-timer lamp on the front of the camera will blink immediately before the picture is taken. If the two- second timer is selected, the self-timer lamp will blink as the timer counts down. Intelligent Face Detection Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 30) is recommended when using the self-timer for group portraits or self-portraits.
Playback Options To view the most recent picture in the monitor, press the D button. 12 / 31 / 2050 12 / 31 / 2050 10 : 00 AM 1/250 1 250 Press the selector right to view pictures in the order recorded, left to view pictures in reverse order.
Playback Zoom Select A to zoom in on pictures displayed in single-frame playback; select B to zoom out. When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. Press DISP/BACK to exit zoom.
Multi-Frame Playback To change the number of images displayed, select B when a picture is shown full-frame in the monitor. 12 / 31 / 2050 12 / 31 / 2050 10 : 00 AM 10 : 00 AM Select B to increase the number of pictures displayed...
V Image Search Image Search based on categories Search for pictures by date, subject, scene, and file type. Press MENU/OK to display the playback menu. Press the selector up or down to highlight V IMAGE SEARCH. Press MENU/OK to display the search category.
Using Playback Menu with Image Search Three playback menus can be performed with image search mode. Press MENU/OK while the search results are displayed. The playback menu will be displayed. Press the selector up or down to highlight the desired menu item. Press MENU/OK to select the highlighted menu.
M Deleting Pictures The ERASE option in the playback menu can be used to delete still pictures and movies, increasing the amount of space available on the memory card or in internal memory (for information on deleting pictures in single-frame playback, see page 20). Note that deleted pictures can not be recovered.
Page 61
■ FRAME : Deleting Selected Images Selecting FRAME displays the dialog shown at right. Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture (the picture is deleted immediately; be careful not to delete the wrong picture).
A Recording Movies Shoot short movies with sound. Sound is recorded via the built-in microphone; do not cover the microphone during recording. Rotate the mode dial to A (movie mode). Display shows time STAN BY available Frame the scene using the zoom control.
Page 63
A Notes • Focus, exposure and white balance are adjusted automatically throughout recording. The color and brightness of the image may vary from that displayed before recording begins. • Movies are recorded as motion JPEG files. • If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.
Page 64
Matching the light source Select C WHITE BALANCE in the shooting menu to display the list below. Option Option Description Description White balance adjusted automatically. AUTO For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white”...
D Viewing Movies During playback, movies are displayed in the monitor as shown at right. The following operations can be performed while a movie is displayed: Operation Operation Description Description Start/pause Press the selector down to start playback. playback Press again to pause. Press the selector up to end playback.
Viewing Pictures on TV Connect the camera to a TV and tune the television to the video channel to show pictures to a group. Connect the A/V cable, as shown below. Be sure that the camera is off before connecting the cable. Connecting the Camera to High Definition (HD) TVs An HDMI cable (available from third-party suppliers) can be used to connect the camera to High Definition (HD) devices (playback only).
Page 67
Viewing Pictures on TV Press D for about a second to turn the camera on. The camera monitor turns off and pictures and voice memos are played back on the TV. Note that the camera volume controls have no effect on sounds played on the TV;...
Printing Pictures via USB If the printer supports PictBridge, the camera can be connected directly to the printer and pictures can be printed without first being copied to a computer. Note that depending on the printer, not all the functions described below may be supported. Connecting the Camera Connect the supplied USB cable as shown and turn the printer on.
Page 69
B Tip: Printing the Date of Recording To print the date of recording on pictures, press DISP/BACK in steps 1–2 to display the PictBridge menu (see “Printing the DPOF Print Order,” on pg. 56). Press the selector up or down to highlight PRINT WITH DATE y and press MENU/OK to return to the PictBridge display (to print pictures without the date of recording, select PRINT WITHOUT DATE).
Printing the DPOF Print Order To print the print order created with r PRINT ORDER (DPOF) in the playback menu (pg. 54): In the PictBridge display, press DISP/ BACK to open the PictBridge menu. PICTBRIDGE PRINT WITH DATE PRINT WITHOUT DATE PRINT DPOF Press the selector up or down to highlight x PRINT DPOF.
Creating a DPOF Print Order The r PRINT ORDER (DPOF) option in the playback menu can be used to create a digital “print order” for PictBridge-compatible printers (pg. 54) or devices that support DPOF. DPOF DPOF (Digital Print Order Format) is standard that allows pictures to be printed from “print orders”...
Page 72
Repeat steps 1–2 to complete the print order. Press MENU/OK to save the print order when settings are complete, or DISP/BACK to exit without changing the print order. The total number of prints is displayed in the monitor. Press MENU/OK to exit. The pictures in the current print order are indicated by a x icon during playback.
Viewing Pictures on a Computer The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT connect the camera to the computer until installation is complete. Installing the Software Two applications are supplied: MyFinePix Studio for Windows and FinePixViewer for the Macintosh.
Page 74
Start the computer. Log in to an account with administrator privileges before proceeding. Exit any applications that may be running and insert the installer CD in a CD-ROM drive. Windows 7/Windows Vista If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed; click Yes (Windows 7) or click Allow (Windows Vista).
Page 75
Macintosh: Installing FinePixViewer Confirm that the computer meets the following system requirements: PowerPC or Intel Pre-installed versions of Mac OS X version 10.3.9–10.6 (for the latest information, visit http://www.fujifilm. OS OS com/) 256 MB or more Free disk space Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running...
Page 76
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software. The version number is printed at the top of the CD label for reference when updating the software or contacting customer support.
Connecting the Camera If the pictures you wish to copy are stored on a memory card, insert the card into the camera (pg. 8). If no card is inserted, pictures will be copied from internal memory. A Note Windows users may require the Windows CD when starting the software for the first time.
Page 78
C Cautions • If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
Using the Menus: Shooting Mode The v-mode and shooting menus contain settings for a wide range of shooting conditions. Using the v -Mode Menu Press the v button to display the v-MODE menu. MODE MENU IMAGE S ZE FILM SIMULATION EXIT Press the selector up or down to highlight the desired menu item.
-Mode Menu Options Menu item Menu item Adjust ISO sensitivity (pg. 67). Choose higher n ISO values when the subject is poorly lit. o IMAGE SIZE Choose image size and aspect ratio (pg. 67). Simulate the effects of different types of film W FILM SIMULATION (pg.
n ISO Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is poor; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at settings above 1600. If AUTO or an option such as AUTO (1600) is selected, the camera will adjust sensitivity automatically in response to shooting conditions.
Aspect Ratio Pictures with an aspect ratio of 4 : 3 have the same proportions as the camera display. Pictures with an aspect ratio of 3 : 2 have the same proportions as a frame of 35-mm film, while an aspect ratio of 16 : 9 is suited to display on High Definition (HD) devices.
Using the Shooting Menu Press MENU/OK to display the shooting menu. SHOOTING MENU MODE IMAGE SIZE IMAGE QUAL TY DYNAMIC RANGE FILM SIMULATION EXIT Press the selector up or down to highlight the desired menu item. Press the selector right to display options for the highlighted item.
Shooting Menu Options Menu item Menu item A SCENE POSITION Choose a scene for SP mode (pg. 23). A SHOOTING MODE Choose program or aperture priority AE for P (P/A) mode (pg. 28). A P MODE Choose options for O mode (pg. 21). Adjust ISO sensitivity (pg.
Page 85
Menu item Menu item C WHITE BALANCE Adjust color for different light sources (pg. 72). E CONTINUOUS Shoot a series of pictures (pg. 74). Choose how the camera meters exposure (pg. B PHOTOMETRY 75). Choose how the camera selects a focus area F AF MODE (pg.
T IMAGE QUALITY Choose how much image files are compressed. Select FINE (low compression) for higher image quality, NORMAL (high compression) to increase the number of pictures that can be stored. U DYNAMIC RANGE Control contrast. Higher values are recommended for scenes that include both sunlight and deep shade or for increased contrast when photographing such subjects as sunlight on water, brightly-lit autumn leaves, and...
Page 87
A Notes • At settings other than Q, auto white balance is used with the flash. Turn the flash off (pg. 37) to take pictures at other settings. • Results vary with shooting conditions. Play pictures back after shooting to check colors in the monitor. ■...
E CONTINUOUS Capture motion in a series of pictures. A Notes • The flash turns off automatically. The previously- selected flash mode is restored when OFF is selected for E CONTINUOUS. • Frame rate varies with shutter speed. ■ While the shutter button is pressed, the camera takes up to 40 pictures, but only the last 23 shots ) or 5 shots ( ) are recorded.
B PHOTOMETRY Choose how the camera meters exposure when Intelligent Face Detection is off. • N MULTI: Automatic scene recognition is used to adjust exposure for a wide range of shooting conditions. • O SPOT: The camera meters lighting conditions at the center of the frame.
• T CONTINUOUS: While the shutter button is pressed halfway, the camera continuously adjusts focus to reflect changes in the distance to the main subject in the focus frame (note that this increases the drain on the battery and that the sound of the camera focusing will be audible).
Page 91
Press the selector up or down to highlight ON. Press MENU/OK to activate S FACE RECOGNITION. ■ REGISTER Shooting Select REGISTER from S FACE RECOGNITION. Press MENU/OK to turn to shooting mode. Press the shutter button to shoot. Capture a front face. REGISTER FACE CAPTURE THE FACE ALONG WITH THE GUIDL NE...
Page 92
Press the selector left, right, up or down to highlight a letter. Press MENU/OK to input the letter. Repeat from step 2 to step 4 to input a name. Press the selector left, right, up or down to highlight SET. Press MENU/OK to register.
Page 93
Press MENU/OK to register. ■ VIEW & EDIT Select VIEW & EDIT from S FACE RECOGNITION to display REGISTERED FACE. REGISTERED FACE TARO BACK Press the selector left or right to highlight a face to view or edit. Press MENU/OK to display PERSONAL INFO.
Page 94
Press MENU/OK to delete a registration. ■ AUTO REGISTRATION Select AUTO REGISTRATION from S FACE RECOGNITION and set it to ON. After shooting the same face several times with 3 FACE DETECTION turned on, the camera automatically recognizes the face. A Notes •...
Using the Menus: Playback Mode The v-MODE and playback menus are used to manage the pictures in internal memory or on the memory card. Using the v -Mode Menu Press the D button to enter playback mode (pg. 11). Press the v button to display the v-MODE menu.
q SLIDE SHOW View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time during the show to view on-screen help. When a movie is displayed, movie playback will begin automatically, and the slide show will continue when the movie ends.
Using the Playback Menu Press D to enter playback mode (pg. 11). Press MENU/OK to display the playback menu. PLAYBACK MENU IMAGE SEARCH ERASE SLIDE SHOW RED EYE REMOVAL PROTECT CROP EXIT Press the selector up or down to highlight the desired menu item. Press the selector right to display options for the highlighted item.
Playback Menu Options The following options are available: Option Option V IMAGE SEARCH Search images based on categories (pg. 44). M ERASE Delete all or selected pictures (pg. 46). q SLIDE SHOW View pictures in a slide show (pg. 82). a RED-EYE REMOVAL Create copies with reduced red eye (pg.
a RED EYE REMOVAL If the current picture is marked with a to indicate that it was taken with Intelligent Face Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye.
■ SET ALL Press MENU/OK to protect all pictures, or press DISP/BACK to exit without changing picture status. ■ RESET ALL Press MENU/OK to remove protection from all pictures, or press DISP/BACK to exit without changing picture status. If the number of pictures affected is very large, the display at right will appear in the monitor while the...
B Tip: Intelligent Face Detection If the picture was shot with Intelligent Face Detection (pg. 30), B will be displayed in the monitor. Press the B button to zoom in on the selected face. Press MENU/OK. A confirmation dialog will be displayed. REC OK? CANCEL Copy size is shown at the top.
N IMAGE ROTATE By default, pictures taken in tall orientation are displayed in wide orientation. Use this option to display pictures in the correct orientation in the monitor. It has no effect on pictures displayed on a computer or other device. A Notes •...
P COPY Copy pictures between internal memory and a memory card. Press the selector up or down to highlight d INTERNAL MEMORY g x CARD (copy pictures from internal memory to the memory card) or x CARD g d INTERNAL MEMORY (copy pictures from a memory card to internal memory).
■ ALL FRAMES Press MENU/OK to copy all pictures, or press DISP/BACK to exit without copying pictures. C Cautions • Copying ends when the destination is full. • DPOF print information is not copied (pg. 56). Q VOICE MEMO To add a voice memo to a COPY ALL OK? 100 0001 still picture, select Q VOICE...
Page 105
Press MENU/OK again to end recording. Recording ends automatically after 30 seconds. F NISH RE REC A Notes • If a voice memo already exists for the current picture, the options at right will be displayed. Select RE-REC to replace the existing memo. •...
S ERASE FACE RECOG. While playing back an image including faces registered with personal information, select S ERASE FACE RECOG. to enlarge a registered face. Press MENU/OK to erase the personal information. A Note Personal information cannot be erased when the image size is t.
The Setup Menu Using the Setup Menu Display the setup menu. 1.1 Press MENU/OK to display the menu for the current mode. 1.2 Press the selector left to highlight a left tab. 1.3 Press the selector up or down to select 4. The setup menu appears.
Setup Menu Options Menu item Menu item e DATE/TIME Set the camera clock. p TIME DIFFERENCE Set the clock to local time (pg. 96). Choose a language. Turn off the speaker, flash, and AF-assist illuminator/self- 7 SILENT MODE timer lamp. Reset all settings except DATE/TIME, TIME DIFFERENCE, BACKGROUND COLOR, and VIDEO SYSTEM to default values.
Page 109
Menu item Menu item g LCD BRIGHTNESS Control the brightness of the display (pg. 99). o AUTO POWER OFF Choose the auto power off delay (pg. 99). Reduce blur. Choose whether the function is performed at all times when the camera is in the shooting mode Z DUAL IS MODE (k CONTINUOUS), only when the shutter button is pressed halfway (l SHOOTING ONLY) or OFF.
p TIME DIFFERENCE When traveling, use this option to switch the camera clock instantly from your home time zone to the local time at your destination. Specify the difference between local time and your home time zone. 1.1 Press the selector up or down to highlight j LOCAL.
m FORMAT Format internal memory or a memory card. If a memory card is inserted in the camera, x will be displayed in the dialog shown at right and this option will format the memory card. If no memory card is inserted, d will be displayed and this option will format internal memory.
ZOOM (CONTINUOUS) is disabled in the following case: - A, G or F is selected in the shooting mode. - An option other than OFF is selected for E CONTINUOUS. A Notes • Pictures taken in continuous shooting modes are always displayed after shooting.
A Notes • If the frame number reaches 999-9999, the shutter release will be disabled (pg. 116). • Selecting s RESET (pg. 94) resets b FRAME NO. to CONTINUOUS but does not reset frame numbering. • Frame numbers for pictures taken with other cameras may differ.
A Note Although OFF is selected for o AUTO POWER OFF, the camera will turn off automatically if no operations are performed for five minutes in the following case: • w QUICK AF or x CLEAR DISPLAY is selected for m POWER MANAGEMENT.
m POWER MANAGEMENT Optimize camera performance for increased battery life, quick focus response, or improved display quality. The following options are available: • v POWER SAVE: Monitor refresh rate is reduced. If no operations are performed for 10 s, the monitor will dim automatically to save power.
Optional Accessories The camera supports a wide range of accessories from FUJIFILM and other manufacturers. ■ Audio/Visual Audio/visual output HDMI cable* HDTV* HD player HDMI cable* ■ Printing PictBridge-compatible printer* * Available from third-party suppliers. ■ Computer Related SD/SDHC memory card...
Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www. fujifilm.com/products/digital_cameras/index.html. Rechargeable NP-50 (supplied) Li-ion battery Battery charger BC-45W (supplied)
Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Care should be taken to avoid scratching the lens or monitor.
Troubleshooting Power and Battery Problem Problem The battery is exhausted. The battery is not in the correct orientation. The camera does not turn on. The battery-chamber cover is not latched. Latch the battery-chamber cover. The AC adapter and DC coupler are not connected properly.
Page 120
Clean the terminals with a soft, dry cloth. The battery has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer. Plug the charger correctly into the power outlet. Possible cause Possible cause Select ENGLISH.
Page 121
Shooting Problem Problem Memory is full. Memory is not formatted. No picture is There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth. taken when the shutter button is The memory card is damaged. Taking pressed.
Page 122
Problem Problem Intelligent Face Detection is not available in the current shooting mode. Face detection X TRACKING is selected for F AF not available. MODE. The subject’s face is obscured by sunglasses, a hat, long hair, or other objects. Intelligent The subject’s face occupies only a small Face area of the frame.
Page 123
Problem Problem The flash is charging. The flash is not available in the current shooting mode. The flash does not fire. The battery is exhausted. An option other than OFF is selected for E CONTINUOUS. Flash The desired flash mode is not available in Flash mode not the current shooting mode.
Page 124
Problem Problem The lens is dirty. The lens is blocked. Pictures are R is displayed during shooting and the blurred. focus frame is displayed in red. 0 is displayed during shooting. Pictures are Slow shutter speed selected and the mottled. subject is poorly lit.
Page 125
Movie Problem Problem T CONTINUOUS is selected for F AF The sound of MODE. Recording camera focusing Zoom in or out while recording a movie. is heard. Intelligent Face Detection is on. Playback Problem Problem Pictures are The pictures were taken with a different grainy.
Page 126
Connections Problem Prob em Monitor is off. The camera is connected to a TV. The camera is not properly connected. An A/V cable was connected during movie playback. No picture or Input on the television is set to “TV”. sound. The camera is not set to the correct video standard.
Page 127
AC adapter/ DC coupler. Insert a fresh or fully-charged spare battery. Remove and reinsert the battery or disconnect and reconnect the AC adapter/ DC coupler. If the problem persists, contact your FUJIFILM dealer. Troubleshooting Solution Solution Page Page...
Clean the contacts with a soft, dry cloth. If the message is repeated, format the memory card (pg. 97). If the message persists, replace the memory card. Contact a FUJIFILM dealer. Unlock the memory card (pg. 8). Use the camera to format the memory card (pg. 97).
Page 129
(pg. 97). If the message persists, replace the memory card. Use a compatible memory card. Contact a FUJIFILM dealer. Delete pictures or insert a memory card with more free space. Delete pictures or insert a memory card with more free space.
Page 130
Remove protection before deleting, rotating, or adding voice memos to pictures. The voice memo can not be played back. Contact a FUJIFILM dealer. Select a different source. These pictures can not be cropped. j RESIZE is not available in these cases.
Page 131
Warning Warning The DPOF print order on the current memory DPOF FILE ERROR card contains more than 999 images. CAN NOT SET DPOF The picture can not be printed using DPOF. A CAN NOT SET DPOF Movies can not be printed using DPOF. CAN NOT ROTATE The picture is protected.
Glossary Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details visible using optical zoom are simply enlarged, producing a slightly “grainy” image. DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored in internal memory or on a memory card.
Internal Memory/Memory Card Capacity The following table shows the recording time or number of available frames at different image qualities. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate.
Specifications System Model Digital Camera FinePix F80EXR Effective pixels 12 million -in. Super CCD EXR Storage media • Internal memory (approx. 40 MB) File system Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format...
Page 135
System A (NATURAL AND FLASH LIGHTING), B (NATURAL LIGHT), G (PRO FOCUS), Scene modes F (PRO LOW-LIGHT), U (PORTRAIT), V (PORTRAIT ENHANCER), Y (DOG), T (CAT), K (LANDSCAPE), L (SPORT), D (NIGHT), U (NIGHT (TRIPOD)), W (FIREWORKS), E (SUNSET), F (SNOW), G (BEACH), X (UNDERWATER), I (PARTY), O (FLOWER), P (TEXT) Picture stabilization Optical stabilization (CCD shift) Intelligent Face Detection Available...
Page 136
System Flash Auto flash; effective range when sensitivity is set to ISO 800 is approx. 30 cm–4.2 m/1 ft.–13.8 ft. (wide angle), 90 cm–2.4 m/3 ft.–7.9 ft. (telephoto) Flash modes Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash with red-eye removal, off, slow synchro with red-eye removal (red-eye removal on) Monitor 3.0-in., 230k-dot color LCD monitor...
Page 137
Power supply/other Power supply NP-50 rechargeable battery; optional AC power adapter AC-5VX and DC coupler CP-50 Guide to the number of Battery Type NP-50 Number of frames Approx. 230 frames (AUTO mode) available frames for battery According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring operation digital still camera battery consumption (extract): When using a battery, use the battery supplied with the camera.
Page 138
NP-50 rechargeable battery Nominal voltage DC 3.6 V Nominal capacity 1000 mAh Operating temperature 0 °C – +40 °C/+32 °F – +104 °F Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.4 in. × 1.6 in. × 0.3 in. Weight Approx.
Page 139
European countries and China. Notices • Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this manual. • Although the monitor is manufactured using advanced high-precision technology, small bright points and anomalous colors (particularly in the vicinity of text) may appear.
Page 140
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/...