Table of Contents
Advertisement
A Notes
• At settings other than Q, auto white balance is
used with the flash. Turn the flash off (pg. 37) to take
pictures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
■ ■ Q
Q : Custom White Balance
: Custom White Balance
Choose Q to adjust white
balance for unusual lighting
conditions. The options at
right will be displayed; frame a
white object so that it fills the
monitor and press the shutter button all the way
down to measure white balance.
If "COMPLETED!" is displayed, press MENU/OK to
set white balance to the measured value. This
value is stored even when the battery is removed
and can be reselected by pressing MENU/OK when
custom white balance options are displayed.
If "UNDER" is displayed, raise exposure
compensation (pg. 35) and try again.
If "OVER" is displayed, lower exposure
compensation and try again.
B Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a
CUSTOM WB
CUSTOM WB
colored instead of a white object.
SHUTTER
SHUTTER
NEW WB
NEW WB
NOT CHANGE
NOT CHANGE
CANCEL
CANCEL
Using the Menus: Shooting Mode
73
Advertisement
Table of Contents
