Wheels And Tires - Can-Am MAVERICK X3 Series 2017 Operator's Manual

219001761-107_a
TYPICAL

Wheels and Tires

Wheel Removal
Loosen nuts then lift and support vehi-
LIFTING AND SUPPORT-
cle. Refer to
ING VEHICLE
in
TION
.
Remove nuts then remove wheel.
Wheel Installation
At installation, it is recommended to
apply antiseize lubricant on the contact
surface of the nut (taper) only.
tmr2017-041-001_a
The tires are unidirectional and their ro-
tation must be kept in a specific direc-
tion for proper operation.
VEHICLE INFORMA-
tmr2011-033-002_a
TYPICAL
1. Direction of rotation
Tighten wheel lug nuts to the specified
torque using the illustrated sequence.
Wheel lug nuts
219001761-127_a
NOTICE
mended wheel nuts for the type of
wheel. Using a different nut could
cause damages to the rim or studs.
Tire Pressure
Tire pressure greatly affects vehi-
cle handling and stability. Insuf-
ficient pressure may cause tire to
deflate and rotate on wheel. Over-
pressure may burst the tire. Al-
ways follow recommended pres-
sure. NEVER set tire pressure be-
low minimum. It could cause the
tire to dislodge from the rim.
______________
MAINTENANCE PROCEDURES
TIGHTENING TORQUE
120 N•m ± 10 N•m
(89 lbf•ft ± 7 lbf•ft)
Always use the recom-
WARNING
101