2.
Remove the two precision screws (M2.6 x 8) to detach the microphone holder spacer.
Precision screws
(M2.6 x 5)
Microphone holder spacer
3.
Remove the one precision screw (M2 x 5) to detach the XLR cover.
4.
Remove the two precision screws (M2 x 4) to detach the MIC bracket.
XLR cover
Precision screw
(M2 x 5)
5.
Remove the two push buttons.
6.
Remove the precision screws (M2 x 5) to detach the cable holder.
7.
Remove the four screws (PTT2.6 x 6) to detach the AXM-48 board.
PMW-160/PMW-150/PMW-EX260
MIC holder assembly
Microphone holder rubber cover
Precision screws
(M2.6 x 8)
Precision screws
(M2 x 4)
MIC bracket
2-34