Procedure
1.
Remove the six tapping screws (2 x 5) to detach the SW bracket A assembly and SW bracket B.
Tapping screws
Tapping screws
(2 x 5)
(2 x 5)
SW bracket A assembly
Note
Position the SW bracket A assembly at three points and the SW bracket B at two points when installing them.
SW bracket B
Positioning locations
2.
Remove the SW conductivity sheet H from the SW bracket A assembly.
PMW-160/PMW-150/PMW-EX260
SW bracket B
Positioning locations
SW conductivity sheet H
SW bracket A assembly
SW bracket A
assembly
2-5