Replacing The System-Board Assembly; Procedure - Dell Inspiron 17 5000 Service Manual

GUID-828BE30D-72EC-4782-A72D-288087A2AB2F
Replacing the system-board
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
GUID-42B39242-3113-4AAD-B862-AEDD2053C6F9

Procedure

CAUTION: To avoid damaging the system board, ensure that no cables are
placed under it.
1 Replace the heat-sink
2 Connect the power-adapter port cable to the system board.
3 Slide the power-button cable into the connector on system board and press
down the latch to secure the cable.
4 Turn the system board assembly over.
5 Slide the ports on the system board assembly into the slots on the palm rest and
keyboard assembly.
6 Align the screw holes on the system board assembly with the screw holes on the
palm rest and keyboard assembly.
computer. After working inside your computer, follow
After working inside your
assembly.
computer. For more safety best
www.dell.com/
Before
75