GUID-98F27B1C-9F09-48EC-83D7-FC85C825E6A4
Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-0FCB4F15-BA46-4820-8DB5-229B75736B52
Procedure
1
Align the screw hole on the I/O board with the screw hole on the palm rest and
keyboard assembly.
2
Replace the screw that secures the I/O board to the palm rest and keyboard
assembly.
3
Adhere the I/O-board cable to the palm rest and keyboard assembly.
4
Connect the I/O-board cable to the I/O-board connector on the system board
and press down the latch to secure the cable.
GUID-B1D7C98D-7D90-481B-8EF3-9BA08F5CBA26
Post-requisites
1
Replace the
hard
2
Replace the battery.
3
Replace the
base
4
Replace the
optical
56
computer. After working inside your computer, follow
After working inside your
drive.
cover.
drive.
computer. For more safety best
www.dell.com/
Before