Table of Contents
Advertisement
FC8-64 64 port 8Gbit port blade
FC8-32E, FC8-48E1
Intelligent blade
FCIP/FC Router blade (FR4-18i)
Virtualization/Application Blade (FA4-18)
Encryption Blade (FS8-18)
Extension Blade (FX8-24)
FCoE/L2 CEE blade FCOE10-24
Table
Table
Table
Table 2 2 2 2 Blade Support Matrix for
Blade Support Matrix for DCX 8510
Blade Support Matrix for
Blade Support Matrix for
Note:
Note: The iSCSI FC4-16IP blade is not qualified for the DCX 8510-8/DCX 8510-4.
Note:
Note:
1.
Note that 16G SFP+ is not supported in FC8-32E and FC8-48E blades
2.
8510 core blade QSFPs, part numbers 57-1000267-01 and 57-0000090-01, are not supported in FC16-64.
The QSFPs supported in FC16-64, part number 57-1000294-01, are not supported on 8510 core blades
either.
3.
E_port connections on FC16-64 blade have the following restriction: connecting a QSFP port between a
FC16-64 blade and an ICL QSFP port on a core blade is not supported.
Power Supply Requirements for Blades in DCX/DCX-4S
Type of
Blades
Blade
Port Blade
1
FC10-6
, FC8-
16, FC8-32,
FC 8-48, FC8-
64
FR4-18i
1
Intelligent
Blade
1
Note that FC10-6 and FR4-18i are not supported with FOS v7.1 or later.
Fabric OS 7.4.1a Release Notes v3.0
DCX 8510-8/DCX 8510-4 Blade Support Matrix
With any mix and up to 8/4 of each. No restrictions around intermix.
Note: FC8-16, FC8-32, FC8-48 blades are not supported on DCX 8510
Note:
Note:
Note:
platforms.
FOS v7.0.1 or later.
Up to a total of 8/4 intelligent blades. See below for maximum supported
limits of each blade.
Not supported.
Not Supported
Up to a maximum of 4 blades of this type.
Up to a maximum of 4 blades of this type.
Supported at slot 1 position only on DCX 8510-8 with FOS v7.3.0.
Supported in the same chassis with FC16-32 and FC8-32E blades only.
Not supported with any other port blades or intelligent blades in the same
chassis. Not supported in DCX 8510-4 chassis.
DCX 8510
DCX 8510
DCX 8510- - - - 8 and
DCX/DCX-4S
DCX/DCX-4S
@110 VAC
@200-240 VAC
(Redundant
(Redundant
configurations)
configurations)
2 Power Supplies
2 Power Supplies
Not Supported
2 Power Supplies
8 and DCX 8510
8 and
8 and
DCX 8510- - - - 4 with FOS v7.
DCX 8510
DCX 8510
4 with FOS v7.4 4 4 4
4 with FOS v7.
4 with FOS v7.
Comments
Distribute the Power Supplies evenly to 2
different AC connections for redundancy.
Page 30 of 142
Advertisement
Table of Contents
