Obtaining the MIBs
You can download the MIB files required for this release from the downloads area of the MyBrocade site. To
download the Brocade-specific MIBs from the Brocade Technical Support website, you must have a user name
and password. Use the following steps to obtain the MIBs you want.
1. On your web browser, go to http://my.brocade.com.
2. Login with your user name and password.
3. Click the downloads tab.
4. On the downloads tab, under Product Downloads, select All Operating Systems from the Download by list.
5. Select Fabric Operating System (FOS), and then navigate to the release.
6. Navigate to the link for the MIBs package and either open the file or save it to disk.
NOTE: Distribution of standard MIBs has been stopped. Download the required standard MIBs from the
NOTE:
NOTE:
NOTE:
http://www.oidview.com/
Blade Support
DCX/DCX-4S Blade Support
Fabric OS v7.4 software is fully qualified and supports the blades for the DCX/DCX-4S noted in the following
table:
16-, 32-, 48- and 64-port 8Gbit port blades (FC8-
16, FC8-32, FC8-48, FC8-64)
FC10-6
Intelligent blade
Virtualization/Application Blade (FA4-18)
FCIP/FC Router blade (FR4-18i)
Encryption Blade (FS8-18)
Extension Blade (FX8-24)
FCoE/L2 CEE blade FCOE10-24
FC16-32, FC16-48, FC16-64, FC8-32E, FC8-48E
Table 1 1 1 1 Blade Support Matrix for DCX and DCX
Table
Table
Table
Note:
Note:
Note:
Note: The iSCSI FC4-16IP blade is not qualified for the DCX/DCX-4S.
DCX 8510-8/DCX 8510-4 Blade Support
Fabric OS v7.4 software is fully qualified and supports the blades for the DCX 8510-8 and DCX 8510-4 noted in
the table below.
FC16-32, FC16-48 16G FC blades
FC16-64 blade
2,3
Fabric OS 7.4.1a Release Notes v3.0
or http://www.mibdepot.com/ website.
DCX/DCX-4S Blade Support Matrix
Supported with FOS v6.0 and above (FC8-64 requires FOS v6.4)
with any mix and up to 8/4 of each. No restrictions around intermix.
Not supported on FOS v7.1 or later
Up to a total of 8/4 intelligent blades. See below for maximum
supported limits of each blade.
Not supported on FOS v7.0 or later
Not supported on FOS v7.1 or later
Up to a maximum of 4 blades of this type.
Up to a maximum of 4 blades of this type.
Up to a maximum of 4 blades of this type.
Not supported in the same chassis with other intelligent blades or
the FC8-64 port blade.
Not supported
Blade Support Matrix for DCX and DCX
Blade Support Matrix for DCX and DCX- - - - 4 4 4 4 S S S S with FOS v7.
Blade Support Matrix for DCX and DCX
DCX 8510-8/DCX 8510-4 Blade Support Matrix
FOS v7.0 or later.
FOS v7.3 or later.
with FOS v7.
with FOS v7.4 4 4 4
with FOS v7.
Page 29 of 142