Saving To Disk - Sony MVS -8000X Quick Setup Manual

SETUP DEFINE saves most of the settings under Engineering Setup to the flash memory. So, please
select PNL1 on the top list, then press SETUP DEFINE. Repeat a SETUP DEFINE for each additional
component (SWR1, DME1 and maybe DME2).
Each of these procedures is very important to make sure your system always boots properly. The first
part (setting the startup mode) you should never have to touch again. However, when you make any
future changes to setup, you need to repeat the SETUP DEFINE procedure to re-save the flash memory
to each system component (SWR, PNL, DME). Otherwise if the switcher re-boots, it will revert to the
last save.

Saving To Disk

You might also like to save a disk file as well. Please go to menu page 7171 (FILE->Configure->Directory).
Let's make a new folder on the internal hard drive. Press the NEW button and create a folder (8
character maximum folder name). Let's call it "Sony"
pg. 74