Table of Contents
Advertisement
#
1
Power Quality Analyzer
2
Decal Set for Input Sockets
3
Hang Strap
4
Alligator Clips. Set of 5
5
Test Leads, 2.5 m. Set of 5
6
AC Current Clamps 400 A (1 mV/A) and 40 A (10 mV/A) switcheable. Set of 4
7
Battery Charger / Power Adapter
8
Line Plug Adapter (country dependent)
9
Getting Started Manual
10
CD ROM with Users Manual and Getting Started Manual (multi-language)
11
Hard Case
12
CD ROM with FlukeView
13
Optical Cable for USB, standard for Fluke 434. Optional for Fluke 433
Contacting a Service Center
To locate a Fluke authorized service center, visit us on the World Wide Web at:
www.fluke.com
+1-888-993-5853 in the U.S. and Canada
+31-40-2675200 in Europe
+1-425-446-5500 from other countries
Safety Information: Read First
The Fluke 433/434 Three Phase Power Quality Analyzer complies with:
•
ANSI/ISA S82.01-1994.
•
EN/IEC61010-1 2
Cat IV, Pollution Degree 2.
•
CAN/CSA-C22.2 No.61010-1-04 (including approval).
Use the Analyzer and its accessories only as specified in the Users Manual. Otherwise,
the protection provided by the Analyzer and its accessories might be impaired.
A Warning identifies conditions and actions that pose hazard(s) to the user.
A Caution identifies conditions and actions that may damage the Analyzer.
The following international symbols are used on the Analyzer and in this manual:
Description
®
Software for Windows
or call Fluke using any of the phone numbers listed below:
nd
edition 1000 V Measurement Category III, 600 V Measurement
®
, standard for Fluke 434. Optional for Fluke 433
General Aspects
Contacting a Service Center
1
1-5
Advertisement
Table of Contents
