Airflow Setting - Mitsubishi SRK25ZS-S User Manual

Name of each part and its function
Unit display section
RUN light (green)
• Illuminates during operation.
•
Blinks slowly when CLEAN operation
(3 seconds ON, 1 second OFF).
Page 26
•
Blinks when airflow is stopped to
prevent blowing out of cold air in
heating operation. (1.5 seconds ON,
0.5 seconds OFF)
Page 31
Accessories
Remote control Remote control
NOTE
•
Buzzer sound for remote control
Buzzer sound (PiPi) is produced when
preset temperature is set to 24 °C or,
AUTO operation mode is selected or,
automatic airflow is selected.
Buzzer sound (Pi) is produced when
air-conditioner is turned off by pressing ON/OFF button (except CLEAN mode).

Airflow setting

•
RUN and TIMER lights blink quickly during invalid operation mode.
Battery ×2
(R03 (AAA, Micro))
Wood screw ×2
holder (for remote control holder mounting)
Page 33
Allergen clear filter
(Light orange)
Photocatalytic washable
deodorizing filter (Orange)
Preset temperature
– 7 –
Remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off
the unit when a remote control is not available.
Page 8
TIMER light (yellow)
Illuminates during TIMER operation.
Filter holder ×2