Panasonic SA-BT222EB Service Manual page 78

Step 5 Lift up Panel P.C.B..
Step 6 Remove 1 screws.
Step 7 Lift up Power Button P.C.B..
Step 8 Remove Front Shield plate Unit.
Step 9 Remove Main P.C.B. Shield Plate.
Step 10 Connect 45P FFC at the connector (P55001) on Main
P.C.B..
Step 11 Connect 18P FFC at the connector (P55002) on Main
P.C.B..
Step 12 Connect extension 18P FFC RFKZBT230P from
CN2006 to CN5402.
Step 13 Connect extension 10P cable REXX1037 from
CN2004 to JW2.
Step 14 Slightly lift up Main P.C.B. according to diagram
shown.
78