Yamaha RY20 Authorized Product Manual page 74

Hide thumbs Also See for RY20:
Table of Contents

Advertisement

NOTE
The (Top, 1-1, and (BACKWARdJ buttons can be used to move around the
song so that you can edit the parts you have recorded.
You can also record the selected section of the current pattern by pressing the
button repeatedly until you have recorded the number of parts desired.
Entering Fills
You can select the precise point at which to insert one of the
transition sections,
Using the (FORWARD] or (BACKWARD] buttons, select the part (main section)
1
that you want the transition to appear in.
While holding down the (SECTION] button, press the Drum Pad button for
2
the transition section you want to play, for example the
button to select
"FILL AB".
While still holding the (SECTION) button, rotate the Jog Dial or use the
3
transition
fill to replace the currently selected (main) section.
or
The
"MEAS I BEAT I CLOCK"
part. As you select the insert point, the indicators are updated to show
the exact timing of the beginning of the fill. If you select an insert point
which exceeds the number of measures of the selected part, the operation
will be ignored.
Before you attempt to perform this operation, there must be a
or
"MAIN B", "INTRO",
section is empty, this operation is not possible.
or
"FILL AB"
"FILL BA".
The display changes as shown:
indicators initially show the top of the selected
recorded in your song. If the current
"ENDING"
Recording a Song
"MAIN A",
65

Advertisement

Table of Contents
loading

Table of Contents