Table of Contents
Advertisement
Recording a User Pattern
n
1
38
Combination Patterns
A unique feature of the RY20 is its ability to create "combination"
patterns. A combination pattern is constructed by selecting tracks
from the preset and user patterns.
Select a section of the pattern. Press and hold the (SECTION] button, then
press the Drum Pad button for the section you want to record. The
appropriate Section indicator lights up, for example, the
indicator.
NOTE
As you record your combination pattern, you can select other sections as you need.
2
Select a pattern from
or by using the m and m buttons. Start recording by pressing the
The initial track selected is the
indicator is lit. You can change tracks by pressing the appropriate
Track Select/Mute button.
NOTE
Although you are using other patterns, the combination pattern controls the time
signature and the number of measures. You can use patterns with different time
signatures
("METER")
out by a number of repititions of itself and a longer pattern will be truncated. This
will not change the data in the original pattern.
You can also apply swing and groove to the combination pattern without affecting
the data in the original pattern. See page 46 for further details.
3
Select the bass drum track of another pattern by rotating the Jog Dial or
by using the [ and [-11 buttons. Notice that the pattern number
changes under the
to
to record into by rotating the Jog Dial
"100"
"149"
bass drum- track. Notice the track
-
"BD"
and/or measure numbers. A shorter pattern will be padded
prompt.
"COMB"
"INTRO"
Advertisement
Table of Contents
