Table of Contents
Advertisement
Changing the Effects
108
Delay Time
In this mode, you can adjust the right and left channel delays.
Select the Delay Time display page by pressing the
1
button. The current levels are displayed under the "D. TIME" prompt with
the left channel level flashing.
NOTE
As with feedback gain, the delay time setting can only be applied to the delay
effects. When the reverberation effects are selected, "-- --" is displayed.
Set the left channel delay time by rotating the Jog Dial or by using the
2
and
buttons.
For the delays
"DELY1"
settings change the length of the delay loop for each channel. A low value
sets a short loop while a high value sets a long loop.
The other two delays,
Sets a 32nd note triplet delay.
T 0
Sets a 32nd note delay.
T1
Sets a 16th note triplet delay.
T 2
Sets a 16th note delay.
T3
Sets an eighth note triplet delay.
T4
Sets an eighth note delay.
T 5
Change the focus to the right channel delay time by pressing the
3
cursor button. Set its value by rotating the Jog Dial or by using the
and
buttons.
and
the range is "00" to "99". These
"DELY2",
and
"DELY3"
"DELY4",
or
use synchronized delays:
Advertisement
Table of Contents
