Panasonic KX-TGP600 Administrator's Manual page 9

7. 5.3.23 SIPxTLS Settings
Add the following configuration parameter.
SIP_TLS_RANDOM_PORT
Value Format
Description
Value Range
Default Value
8. 5.3.28 VQ Report by PUBLISH
Add the following configuration parameter.
VQREPORT_SEND_OPT_CODEC_ENABLE
Value Format
Description
Value Range
Default Value
VQREPORT_SEND_OPT_NW_CHANGE
Value Format
Description
Value Range
Default Value
9. 5.3.30 Telephone Settings
Add the following configuration parameter.
CNIP_FROM_ENABLE
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether to assign a random port (ephemeral port) number or a static port
number.
Note
・All lines that use SIP-TLS are defined by this parameter.
・UDP/TCP ports are unaffected by this parameter.
・Y: Assign a random TLS port number
・N: Assign a static TLS port number (Refer to SIP_SRC_PORT_n)
Y
BOOLEAN
Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is
changed.
・Y: Send VQREPORT when a change of codec is detected
・N: Send VQREPORT at the end of a conversation
N
INTEGER
Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall
below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or
ALERT_REPORT_MOSQ_WARNING before the phone sends VQREPORT.
The ALERT_REPORT_TRIGGER setting determines whether
ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING is used as the
threshold.
0–5
(The number of consecutive times. 0:Disable)
Example:
If "2" is specified and the MOS value falls within the threshold 2 consecutive times,
VQREPORT is sent.
0
BOOLEAN
Specifies whether to use the 'FROM' header or the 'PAI' header in CNIP (Calling Number
Identification Presentation).
・Y: Use 'FROM' header
・N: Use 'PAI' header
N