Panasonic KX-TGP600 Administrator's Manual page 5

4. 5.3.27 SRTP Settings
Change the followings in "
(Before)
Value Range
(After)
Value Range
5. 5.3.32 Call Control Settings
Add the following configuration parameter.
VM_SUBSCRIBE_SPECIFIC_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Change the followings in "
(Before)
Value Range
(After)
Value Range
Change the followings in "
(Before)
Value Range
(After)
SRTP_CONNECT_MODE_n " on page 269
• 0: SRTP
• 1: RTP/SRTP
Note
• When RTP/SRTP is selected, operation is in RTP mode.
• 0: SRTP
• 1: RTP/SRTP
• 2: RTP&SRTP (Panasonic PBX only)
Note
• 0: Use only SRTP for outgoing and incoming calls.
• 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.
• 2: Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a Panasonic PBX.
"SRTP_MIX_TRANSFER_ENABLE_n" must also be set to "Y".
VM_SUBSCRIBE_SPECIFIC_1, VM_SUBSCRIBE_SPECIFIC_2, ...,
VM_SUBSCRIBE_SPECIFIC_8
STRING
Specifies the defined name of a voice mail box.
Max. 32 characters
Empty string
IDLE_SOFT_KEY_A " on page 298
• 1: Phonebook
• 2: Menu
• 3: Outgoing Call Log
• 4: Incoming Call Log
• 5: Redial
• 6: Page
• 1: Phonebook
• 2: Menu
• 3: Outgoing Call Log
• 4: Incoming Call Log
• 5: Redial
• 6: Page
• 7: Intercom Call
IDLE_SOFT_KEY_B " on page 298
• 1: Phonebook
• 2: Menu
• 3: Outgoing Call Log
• 4: Incoming Call Log
• 5: Redial
• 6: Page