Panasonic KX-TGP600 Administrator's Manual page 8

4. 5.3.13 XMPP (UC-ONE) Settings
Add the following configuration parameter.
UC_USERID_CASE_SENSITIVE
Value Format
Description
Value Range
Default Value
5. 5.3.21 NAT Settings
Add the following configuration parameter.
EXTERNAL_RTP_PORTx
Value Format
Description
Value Range
Default Value
6. 5.3.22 SIP Settings
Add the following configuration parameter.
SIP_REPLACE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SEND_180_ALERT_ENABLE
Value Format
Description
Value Range
Default Value
SIP_INC_INVITE_RTP_MODE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether the authentication ID is case-sensitive when accessing the UC server.
・Y: Enable
・N: Disable
N
INTEGER
x=1-10
Specifies the port number of the router in Static NAT status.
0, 1024 - 59998 (only even ports)
0: Disable
0
SIP_REPLACE_ENABLE_1, SIP_REPLACE_ENABLE_2,...,
SIP_REPLACE_ENABLE_8
BOOLEAN
Specifies whether to use "Replaces Header".
・Y: Use "Replaces Header"
・N: Do not use "Replaces Header"
Y
BOOLEAN
Specifies whether to send 180 before an alert.
・Y: Send 180
・N: Do not send 180
N
SIP_INC_INVITE_RTP_MODE_1, SIP_INC_INVITE_RTP_MODE_2,...,
SIP_INC_INVITE_RTP_MODE_8
INTEGER
Specifies whether to send RTP after receiving a second INVITE.
・0: Start receiving RTP after receiving a second INVITE
・1: Start sending/receiving RTP after receiving a second INVITE
0