Entering A Memory Channel - Icom IC-A14 Instruction Manual

4
MEMORY OPERATION

■ Entering a memory channel

Enter often-used frequencies using the following instructions.
D For the IC-A14
q Push [CLR] to select the frequency mode, if necessary.
w Set the desired frequency. (p. 8)
• Push [FUNC] , then push [WX](7) to select a weather channel
mode, and then select the desired weather channel using [Y]/
[Z] or keypad if desired. (p. 23)
e Push [FUNC], then push [MW](MR) to enter the select
memory write mode.
• The memory mode icon blinks.
No frequency is displayed when a blank channel is
selected.
r Push [Y]/[Z] to select a memory channel number.
• Push [FUNC], then push [BANK](3) to enter the bank selection
mode, and push [Y]/[Z] or an appropriate digit keys ([0]–[9]),
then push [ENT] to select the BANK number, if desired.
t Push [ENT] to program the entry and return to the fre-
quency mode.
13
Blinks when the select
memory write mode is
selected.
• EXAMPLE: Entering WX-05 into memory channel 9 in
memory BANK 3.
Push
Push then
Push or ,
or, push
Push then
Push then
Push then
*Briefly appears.
Push or ,
or, push
*Briefly appears.
Push to complete the entry.