HP MSR Series Configuration Manual page 84

Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
# Display the detailed information about VRRP group 1 on Router B.
[RouterB-Ethernet1/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1 Router A is the master, Router B is the backup and packets
sent from Host A to Host B are forwarded by Router A.
If Router A fails, you can still ping Host B successfully on Host A. To view the detailed information
about the VRRP group on Router B, use the display vrrp verbose command.
# If Router A fails, display the detailed information about VRRP group 1 on Router B.
[RouterB-Ethernet1/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The output shows that if Router A fails, Router B becomes the master, and packets sent from host A
to host B are forwarded by Router B.
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: None
: 202.38.160.111
: 0000-5e00-0101
: 202.38.160.1
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: 4200ms left
: None
: 202.38.160.111
: 202.38.160.1
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: None
: 202.38.160.111
: 0000-5e00-0101
: 202.38.160.2
80
: 1
: Master
: 110
: 5
: 1
: Backup
: 100
: 5
: 1
: Master
: 100
: 5