HP MSR Series Configuration Manual page 39
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1, Router A is the master and Router B is a backup. Packets from Host
A to Host B are forwarded through Router A.
When a fault is on the link between Router A and Router C, you can still successfully ping Host B on Host
A. To view information about VRRP group 1, use the display vrrp command.
# Display detailed information about VRRP group 1 on Router A when a fault is on the link between
Router A and Router C.
[RouterA-Ethernet1/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B when a fault is on the link between
Router A and Router C.
[RouterB-Ethernet1/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
: 1
Adver Timer
: Up
State
: 100
Running Pri
: Yes
Delay Time
: 2200ms left
: Simple
Key
: 10.1.1.10
: 10.1.1.1
: Standard
: Virtual MAC
: 1
Adver Timer
: Up
State
: 110
Running Pri
: Yes
Delay Time
: 2200ms left
: Simple
Key
: 10.1.1.10
: 10.1.1.2
: 1
State : Negative
: Standard
: Virtual MAC
: 1
Adver Timer
: Up
State
: 100
Running Pri
: Yes
Delay Time
: Simple
Key
: 10.1.1.10
: 0000-5e00-0101
35
: 5
: Backup
: 100
: 5
: ******
: 5
: Backup
: 80
: 5
: ******
Pri Reduced : 30
: 5
: Master
: 100
: 5
: ******
Advertisement
Table of Contents
