Before Testing; Calibration; How To Code Your Meter (For Β-Ketone Test); Checking The Code Number - GlucoRx HCT Owner's Manual

BEFORE TESTING

Calibration

You must calibrate the meter every time you begin to use a new vial
of β-Ketone test strips by setting the meter with the correct code.
Test results may be inaccurate if the code number displayed on the
monitor does not match the number printed on your individual foil
packet.
How to Code Your Meter
(for β-Ketone test)(b)
1. Insert the code strip when the monitor is off. Wait until the code
number appears on the display.
NOTICE:
Make sure the code number on display, and individual foil packet are
the same. The code strip should be within the expiry date, otherwise
an error message may appear.
2. Remove the code strip, the display will show "OK". This tells you
that the meter has finished coding and is ready for β-ketone testing.

Checking the Code Number

(c)
You need to make sure that the code number displayed on the meter
matches the number on your ketone test strip vial or individual foil
packet before you proceed. If it matches, you can proceed with
your test. If the codes do not match, please stop testing and repeat
the calibration procedure. If the problem persists, contact GlucoRx
Customer care on 01483 755133 for help.
NOTICE:
The codes used in this manual are examples only; your meter may
display a different ketone code.
15