Configure Sensors And Alarm Settings; Specification And Alarm - Escort MU-IN-D-8-L User Manual

Escort iMiniPlus PDF Logger Quick User Guide v1.1

10.3 Configure Sensors and Alarm Settings

Sensors Tab – this displays the sensor information some of which can be
changed by using Configure Sensor(s) and others that remain fixed i.e. range -
40°C to 70°C. The description "Internal" refers to the type of sensor as opposed
to "External" which will display on the external sensor model.
Configure Sensor(s)... - click on this button to set up the alarm and LCD
display parameters.

10.3.1 Specification and Alarm

Raise alarm on below lower spec readings –
activate the low alarm and select the value in the box immediately to the right.
Note if the lower spec value is 0°C, then the alarm is triggered at -0.1°C, not
0.0°C as this value is considered within specification.
Raise alarm on above upper spec readings –
to activate the high alarm and select the value in the box immediately to the
right. Note if the upper spec value is 50°C, then the alarm is triggered at 50.1°C,
not 50.0°C as this value is considered within specification.
Increment -
the grouping size used for listing out-of-specification readings.
Alarm Type
This feature allows the user to specify the conditions that will trigger an alarm.
Standard Alarm
Number of consecutive out of specification readings –
triggered if the readings are consecutively over or under the specified threshold.
For instance if the upper spec is 50°C and the value for the number of
consecutive out-of-spec readings is 3 and the logging interval is 10minutes, the
readings will need to be in excess of 50°C for 30 minutes before the alarm is
Escort Verification Technologies, Inc. dba ESCORT Data Loggers
PO Box 309, 120 Parkway Drive
Buchanan, VA 24066
Ph: 540-254-1433 Fax: 540-254-2433
tick this box if you want to
tick this box if you want
- 14 -
Email: techsupport@escortdataloggers.com
Issue Date: 23 May 2011
Version 1.1
the alarm is