Installing Port Cards In The Kx-Tvm200 - Panasonic KX-TVM50 Getting Started

2.6 Installing Port Cards in the KX-TVM200

2.6 Installing Port Cards in the KX-TVM200
1.
Position the front of the card so that the jacks fit in the open slot. Make sure that the tabs on both
sides of the card fit into place. Holding the card firmly in place, lower the other end of the card so
that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
Extension Bolt
2.
Insert the new extension bolts (included with the card) into the holes on the card, and tighten
them to secure the card.
12 Getting Started
2
Extension Bolt
1