Output Channel − Presets - QSC touchmix-30 pro User Manual

Output Channel − Presets
Save, recall and copy the settings associated with an Aux,
Sub Group or Main L/R output channel.
1. Presets tab – Selects the Presets screen.
2. Current Preset – Displays the name of the current
active preset for the selected channel.
3. Save/Save As – Displays a page with options
for naming a preset and selecting internal or USB
storage destination.
4. Factory presets list – Displays a list of factory
programmed presets. Voicings for QSC passive
loudspeakers are provided. Reset sets all output
channel's parameters to their factory default state.
The Reset preset is at the bottom of the list, scroll
down to see.
5. Mixer presets list – Up to 100 Internal Presets may
be stored (saved) to and recalled from the mixer's
internal memory.
6. USB presets list – Up to 100 External Presets may
be stored (saved) to and recalled from an External
(USB) storage device.
7. Selected preset – When a preset is selected, the
preset's background is highlighted blue, and the list's
title is highlighted blue.
8. Delete button – Select a User Preset and touch this
button to delete the Preset.
9. Copy to USB button – Copy the selected Preset to
a connected USB drive.
10. Copy to Mixer button – Copy the selected Preset to the Internal Mixer storage.
11. Recall button – Recalls stored output channel settings including EQ, limiter, filter, mute assignments, DCA assignments, link state. Levels and
tuning settings may be recalled or omitted (see 12 and 13 below).
12. Omit Levels switch – When set to On, recalling the preset will not change any levels.
13. Omit Tuning switch – When set to On, recalling the preset will not change the anti-feedback tuning settings.
14. Prev / Next buttons – Navigates to the next or previous channel. The buttons cycle through the Input, Playback, Record, and FX channels, then
loops back to Input 1. If you start in the Auxes, the buttons cycle through the Auxiliary outputs and the Main L/R channels.
15. Channel controls – Output controls for selected channel. See Channel Controls topic.
16. Main Channel controls – Output controls for the Main L/R outputs. See Channel Controls topic.
1001108-01-A
Home
Aux Outputs1-8
Aux 1 Presets
Inputs 1-8
2
4 5
7
8 9
11
12
48
Touch an
Touch an
Aux
Aux Bank
Channel
1 14
3
Aux 1
15
6
Cue
L C
Aux
1
L
G
48
0
10 8
13 14
Mute
Touch
the Presets
Tab
Scene:
Default
Main
16
Cue
R
Main
L/R
10 10
10 10
5 5
L
u u
F
5
5
10
10
20
20
0
40
40
∞
Mute