Recording; Selecting A Media To Record; Formatting Media; System Frequency Selection - Panasonic HC-X1 Operating Instructions Manual

Recording

Selecting a media to record

You can specify the card slot to which motion pictures are to be recorded.
Select the menu. (l 39)
MENU
: [RECORD SETUP] # [MEDIA SELECT] # [SD CARD 1]/[SD CARD 2]

Formatting media

If you use the SD cards for the first time for recording with this unit, format the cards.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC etc.
≥ When using two SD cards, format both SD cards.
1
Select the menu. (l 39)
MENU
: [OTHER FUNCTION] # [FORMAT MEDIA]
2
Touch [SD CARD 1] or [SD CARD 2].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. Otherwise it may not
be possible to use the card on this unit.

System frequency Selection

Set the system frequency of this unit.
Select the menu. (l 39)
(In Recording Mode)
MENU
: [SYSTEM MODE] # [SYSTEM FREQ] # [59.94Hz] or [50.00Hz]
(In Playback Mode)
MENU
: [OTHER FUNCTION] # [SYSTEM FREQ] # [59.94Hz] or [50.00Hz]
≥ After you have changed the system frequency, this unit will be restarted automatically.
≥ By default, the system frequency is set to the broadcasting system of the region where this
product was purchased.
≥ This function's default setting is [50.00Hz].
29
DVQX1102