Power Supply; Charging The Battery - Panasonic HC-X1 Operating Instructions Manual

Preparation

Power supply

∫ About batteries that you can use with this unit (as of November 2016)
The batteries that can be used with this unit are VW-VBD58/AG-VBR59/AG-VBR89/AG-
VBR118.
≥ The AG-VBR59/AG-VBR89/AG-VBR118 supports quick charging.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
Important:
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
(The battery temperature should also be the same.)
∫ About the Battery Charger
This unit can charge two battery packs simultaneously and supports quick charging batteries.
A DC IN 12 V connector
B CHARGE indicators
[CHARGE 1/CHARGE 2 ]


CHARGE indicators [CHARGE 1/CHARGE 2]
Indicate the charge status as follows.
Indicator
Quick charging is in
Lit green progress. (Battery
charging time: l 21)
Normal charging is in
Lit orange
progress.
Charging has stopped due
Blinking orange
to an error. (l 6)
Charging is complete, or a
Off battery pack is not
inserted.
DC IN 12 V connector [
Connects to the DC plug of the AC adaptor.
Charge status
]
19
DVQX1102