Table of Contents
Advertisement
_:')i_Attention:
Turn power switch to off ("0")
before inserting or removing the bobbin.
When
inserting
or
removing
the
bobbin,
the
needle
and
presser
foot
must
be fully
raised.
_
Insert the bobbin in the bobbin case with
the thread running
in a counterclockwise
direction (arrow).
uu
uu
A
Putl the thread through the slit (A).
With a finger
held gently on top of the
bobbin.
Draw the thread at the arrow markings into
the stitch plate thread guide from (A) to (B).
A
/
Pull the thread at the arrow markings into
the stitch plate thread guide from (B) to (C).
To cut off excess thread pull thread back
over the cutting off blade at point
(C).
Close the bobbin cover plate.
12
Advertisement
Table of Contents
