Assemble The Fork And Steering Arms - Huffy GREEN MACHINE Owner's Manual

Assemble the Fork and Steering Arms

F
G
H
STEPS:
NOTE: Make sure Seat Bracket is pointing UP before starting.
1. Insert Fork Tube
up.
2. Insert Pivot Shaft
as shown.
3. Hold one Steering Arm
D
.
4. Install Washer
5. On opposite side, place Steering Arm
Arm is curved BACKWARDS.
6. Install second Washer
7. Tighten both Screws
arms move easily back and forth.
See Torque Chart for recommended torque.
E
Remove and set aside Bolt
from mounting hole
A fully into the Frame Tube
D through Frame. Place Bushings
F so that it is curved BACKWARDS and place on Pivot Shaft
G H
and Screw .
G
and Screw
H
securely with two allen wrenches. - Make sure Steering
D C
NOTE:
C .
B so that both Mount Holes
F
against Bushing
H
.
F
G H
B
A
E on each side of Pivot Shaft
E
, making sure Steering
Attach Steering Linkage >>
C line
9