Assemble Front Cowling - Huffy GREEN MACHINE Owner's Manual

Assemble the Front Cowling
E
TIP: Rotate Wheel/Fork assembly over so that mounting hole Dimple
NOTE: If needed, loosen Steering Arm screws during assembly, then retighten. See Torque
Chart for recommended torque.
1. Attach the Cowling
fit around the fork legs.
2. Insert SHORT Shoulder Screw
Fork Tube E
3. Install Screw
Torque Chart for recommended torque.
4. Snap both Cowling Badge Tabs
CAUTION: Ensure Wheel turns smoothly without rubbing.
10
H
A
B
A
by sliding it down and back on the Fork so that the Cutouts
C
.
from the bottom and tighten securely with two allen wrenches. See
F
G
G
E
down through Cowling, Frame
into place as shown.
C
D
F
H
is on TOP.
D
and fully inserted
B