Torque Chart - Huffy GREEN MACHINE Owner's Manual

Torque Chart

Recommended Torque:
Use of a torque wrench is recommended. Recommended torque for each fastener is listed
below. In addition to tightening to the recommended torque, please ensure the parts of
the product are sufficiently tightened by performing the functional tests (in the compo-
nent assembly sections of the owner's manual) on each component as it is tightened.
NOTE: Please check that all fasteners on the product are torqued according to the table
below:
Recommended Torque for clean, dry threads:
Fastener Size
.157 in (4 mm)
.196 in (5 mm)
.236 in (6 mm)
.275 in (7 mm)
.314 in (8 mm)
.393 in (10 mm)
Torque (ft-lb / N•m)
3.1 ft-lbs (4.2 N•m)
5 ft-lbs (6.8 N•m)
7 ft-lb (9.5 N•m)
12 ft-lbs (16.3 N•m)
17 ft-lbs (23 N•m)
33 ft-lbs (44.7 N•m)
How to Measure:
Screw or bolt size is determined
by the width at the THREADS as
shown.
17