New Holland T4.75F Operator's Manual page 236

Hide thumbs Also See for T4.75F:
Table of Contents

Advertisement

REAR POWER TAKE-OFF
Completely independent with two speeds 540/1000      RPM.
Engine speed:
2196      RPM
2260      RPM
Manual control: clutch control lever, take-off engage lever and speed selector lever. Direction of rotation with tractor
seen from behind: clockwise.
FRONT POWER TAKE OFF
Manual control with knob for electromagnetic clutch. Fully independent at 1000 rpm. Direction of rotation with
tractor seen from the front: anticlockwise.
Engine speed:
MECHANICALLY OR ELECTRONICALLY CONTROLLED REAR HYDRAULIC LIFT
Oil supply is from the transmission by gear pump operated directly by the engine:
NEW HOLLAND
TYPE
BOSCH
25
TYPE
pump speed with engine on full power: 2502      RPM
rated flow rate with engine on full power:
NEW HOLLAND
TYPE
BOSCH
25 (on request) 63,8      l/min
TYPE
pressure relief valve calibration: 190      bar (2755      psi)
Maximum rear lift capacity
With third point connected to top hole of support bracket and for the entire lifting stroke:
at link ends of horizontal arms
with centre of gravity at 610      mm (24.02      in) from link ends
Maximum front lift capacity
With third point connected to top hole of support bracket and for the entire lifting stroke:
at link ends of horizontal arms
with centre of gravity at 610      mm (24.02      in) from link ends
THREE POINT HITCH
st
nd
1
and 2
category three-point implement linkage device.
Stabilisers for all models:
− mechanically adjusted telescopic stabiliser struts (standard).
− hydraulically adjusted telescopic stabiliser struts (on request).
Link arms with rapid attachment (on request).
Single or double-acting rear mount remote valves: up to three, two with float and automatic release.
Single or double-acting rear mount remote valves: two with flow rate control (on request).
Front 3-Point Hitch
st
nd
1
and 2
category three-point implement linkage device.
PTO speed:
540      RPM
1000      RPM
2037      RPM
2300      RPM
C42
C42 (standard) 48,6      l/min
9 - SPECIFICATIONS
Engine speed:
2300      RPM
2300      RPM
9-10
PTO speed:
565      RPM
1017      RPM
PTO speed:
1000      RPM
1032      RPM
1835      kg (4045      lb)
1715      kg (3781      lb)
1275      kg (2810.9      lb)
980      kg (2160.5      lb)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4.85fT4.95fT4.105f

Table of Contents