Indicator
Name
Turn Signal
Indicators
High Beam
Indicator
Lights On
Indicator
Immobilizer
System Indicator
Security System
Alarm Indicator
Indicator
On/Blinking
Blinks when you operate the turn
●
signal lever.
Blink along with all turn signals when
●
you press the hazard warning
button.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch
●
is on, or in AUTO when the exterior
lights are on.
Comes on briefly when you set the
●
power mode to ON, then goes off.
Comes on if the immobilizer system
●
cannot recognize the key
information.
Blinks when the security system
●
alarm has been set.
Explanation
Does not blink or blinks rapidly - A turn
●
signal light bulb has blown. Change the
bulb immediately.
2 Replacing Light Bulbs P. 463, 464, 465
—
If you set the power mode to ACCESSORY
●
or VEHICLE OFF (LOCK) while the exterior
lights are on, a chime sounds when the
driver's door is opened.
Blinks - You cannot start the engine. Set
●
the power mode to VEHICLE OFF (LOCK),
then select the ON mode again.
Repeatedly blinks - The system may be
●
malfunctioning. Have your vehicle checked
by a dealer.
Do not attempt to alter this system or add
●
other devices to it. Electrical problems can
occur.
2 Security System Alarm P. 131
uuIndicatorsu
Message
—
—
—
—
—
Continued
77