Indicator
Name
M (sequential
shift mode)
Indicator/Gear
Position Indicator
Seat Belt
Reminder
Indicator
Low Fuel
Indicator
On/Blinking
Comes on when the manual
●
sequential shift mode is applied.
Comes on and the beeper sounds if
●
you are not wearing a seat belt when
you set the power mode to ON.
If the front passenger is not wearing
●
a seat belt, the indicator comes on
about a few seconds later.
Blinks while driving if either you or
●
the front passenger has not fastened
a seat belt. The beeper sounds and
the indicator blinks at regular
intervals.
Comes on when the fuel reserve is
●
running low (approximately 2.8 U.S.
gal/10.5 Liter left).
Blinks if there is a problem with the
●
fuel gauge.
Explanation
2 Sequential Shift Mode P. 353
The beeper stops and the indicator goes off
●
when you and the front passenger fasten
their seat belts.
Stays on after you or the front
●
passenger has fastened the seat belt - A
detection error may have occurred in the
sensor. Have your vehicle checked by a
dealer.
2 Seat Belt Reminder P. 31
Comes on - Refuel your vehicle as soon as
●
possible.
Blinks - Have your vehicle checked by a
●
dealer.
uuIndicatorsu
Message
—
Continued
73