uuReplacing Light BulbsuFront Side Marker Light Bulbs
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Side Marker Light: 2 CP
Inner Fender
Clip (A)
Bulb
Side Turn Signal/Emergency Indicator Lights
Door mirror side turn lights are LED type. Have an authorized Acura dealer inspect
and replace the light assembly.
464
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger's side: Turn the steering wheel
to the left.
Driver's side: Turn the steering wheel to
the right.
2. Remove the holding clips (A) and (B), pull
the inner fender back.
Clips (B)
3. Turn the socket counter-clockwise and
remove it, then remove the old bulb.
4. Insert a new bulb.
Socket
1Front Side Marker Light Bulbs
Holding clip (B-type)
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Clip
Insert the clip with the pin raised, and push until it is
flat.
Push until the
pin is flat.