Acura RLX 2017 Owner's Manual page 73

uuIndicatorsu
Indicator Name
Malfunction
Indicator Lamp
Charging System
Indicator
Shift Lever
Position Indicator
Transmission
Indicator
72
On/Blinking
Comes on when you set the power
●
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine did not
start. If "readiness codes" have not
been set, it blinks five times before it
goes off.
Comes on if there is a problem with
●
the emissions control system.
Blinks when a misfire in the engine's
●
cylinders is detected.
Comes on when you set the power
●
mode to ON, and goes off when the
engine starts.
Comes on when the battery is not
●
charging.
Indicates the current shift lever
●
position.
Blinks if the transmission system has
●
a problem.
Explanation
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 537
Comes on while driving - Have your
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe place
●
where there are no flammable objects. Stop
the engine for 10 minutes or more, and
wait for it to cool down. Then, take the
vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 519
Comes on while driving - Turn off the
●
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 518
2 Shifting P. 351
Blinks while driving - Avoid sudden starts
●
and acceleration and have your vehicle
checked by a dealer immediately.
Message
—