Advertisement
GNC710 Installation
Step 1: Open the cover plate to insert SD Card (optional)
Step 2: Place and stick the installation position map on the ceiling or the wall to suit your desired
location.
Step 2: Mark and drill holes on the wall or ceiling.
Step 2: Insert the expansion bolt into the hole.
Step 3: Fasten the installation screws to secure the device on the wall or ceiling. You may move
device the cover back and forth and tighten the it.
Step 4: Please use screwdriver to loosen the adjusting screw and adjust the camera to desired
viewing direction and tighten back the screw.
6
Advertisement
