Replacement Filter 10-Pack; Vent Filter - LG PTAC Type Product Data Book

60hz/r410a

Hide thumbs

Table of Contents

6RWU0-03A

2.3 Replacement Filter (10 Pack)

The unit is provided with two easy-to-use replaceable mesh

filters which can be cleaned periodically form time to time.

2.4 Vent Filter

The Vent filter is used to filter the air flowing inside the

room when Air Ventilation is performed by means of the

ventilation lever.

Installation Procedure:

The Installation and servicing of the equipment should be

performed by qualified and experienced personnel only.

Before cleaning the vent filter, disconnect power to the unit

by unplugging the power cord at the wall outlet or subbase,

or disconnect power at the fuse box or circuit breaker. If

unit is operated with vent door closed, the vent filter does

not need to be cleaned.

1. Remove the cabinet front as described in Front

Removal.

2. Remove the six screws securing the chassis to the wall

sleeve with a Phillips-Head screwdriver.

3. Slide the chassis out of the wall sleeve far enough so

that the vent filter is accessible as shown in Figure A.

4. Remove the vent filter by unscrewing the two screws at

the top of the filter and gently pulling the filter away from

the partition panel. Refer to Figure B.

5. Clean and replace the filter by reattaching the hook to

the bottom of the vent door and replacing the two

screws, slide the chassis back into the wall sleeve,

secure it in place with six screws and reinstall the front

cabinet.

Note:

Vent filter supplied as SVC Part not as an accessories

part. Vent Filter can requested by Part Number

5230A20016A

Accessories