Siemens LOGO! CMR2040 Operating Instructions Manual page 96

Configuration (WBM)
5.10 WAN
The reachability of the IP address from the Internet must be enabled by the service provider.
● Active
– If the option is enabled, the use of DynDNS is enabled.
– If the option is disabled, the use of DynDNS is not enabled.
● DynDNS provider
You can select the following service providers:
– DynDNS
– No-IP
● Host
Host name of the CMR that you agreed with your service provider (DynDNS) or that you
select yourself (No-IP).
● User name
User name assigned by the service provider (DynDNS) or that you select yourself (No-
IP).
● Password
Password assigned by the service provider (DynDNS) or that you select yourself (No-IP).
CA certificate
Here you import the file of the CA certificate of the DynDNS service provider. The certificate
serves to authenticate the service provider with the CMR.
Certificates are not absolutely necessary for oeration.
Depending on the service provider, the following certificate is required:
● DynDNS
DigiCert CA
● No-IP
Geo Trust Global CA
Request the relevant valid certificate from your provider.
Parameter
● Currently used file
Display of the file name of the currently used file
● Delete
With the button, you delete the currently used file.
The file is deleted only after you click "Apply" button.
96
Address: http://www.dyndns.org/
Address: http://www.noip.com/
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040