Table of Contents
Advertisement
Diagnostics and maintenance
6.6 Replacing the CMR
Transfer of the configuration data to the new CMR
The procedure for transferring the configuration data to the CMR depends on whether you
use an SD card in the CMR:
● Device replacement without SD card
If you do not use an SD card, transfer the configuration data from the configuration PC to
the new CMR before replacing the device.
When you create the configuration data using the WBM of the CMR, you have the option
of saving the configuration data on the configuration PC.
● Device replacement with SD card
If you have used an SD card in the old CMR, after turning off the power supply remove
the card from the old CMR and insert it in the new CMR before connecting up and
installing it.
When it restarts, the CMR reads the configuration data from the SD card.
For information on saving, loading and editing configuration files, see section Configuration
(Page 77).
138
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040
Hide quick links:
Advertisement
Table of Contents
