Configuration (WBM)
5.13 Monitoring
Procedure
Requirement: The CMR and BM must be connected via an Ethernet cable.
1. In the "LOGO! BM" tab, enter the IP address of the BM in the "IP address of the LOGO!
BM" input box.
2. Select the "Active" check box so that the CMR establishes a connection to the BM.
Figure 5-5
Monitoring - "LOGO! BM" tab: Establishing a connection to the BM
122
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040