Adjusting The Backrest; Adjusting Head Restraint Height - Britax parkway SGL User Manual

Using the Booster Seat

Adjusting the Backrest

WARNING! Reclining the vehicle seat back may
adversely affect the position of the vehicle seat belt across
the child and may result in death or serious injury in a crash.
Refer to your vehicle owner's manual for information on
adjusting the vehicle seat back with child seats.
Push the backrest until it rests
against the vehicle seat back
(Fig. A). If the vehicle seat back
is adjustable, move it to the
upright position.
IMPORTANT: Do not recline
the backrest past the allowable
adjustable range (Fig. B, C).
16
a
B
C

Adjusting Head Restraint Height

The head restraint can be adjusted and locked into different
positions. Check the fit with child seated in booster seat.
Ensure that the shoulder belt guides are at or just above the
child's shoulder, see page 6.
1 Squeeze and hold the head restraint
height adjuster handle to adjust the
head restraint (Fig. D).
2 Slide head restraint up or down to the
desired level (Fig. E).
3 Release the head restraint height
adjuster handle. Repeat this process
until the shoulder belt lies across
the center of the child's chest and
is positioned at or above the child's
shoulder when positioned through the
shoulder belt guide (Fig. F).
4 Ensure the head restraint has locked
into place.
Using the Booster Seat
D
E
F
17