Siemens SIMATIC S7-1500 System Manual page 237

IECEx approval
According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type
of protection "n") and IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General
requirements)
RCM (C-Tick) Declaration of c onformity for Australia/New Zealand
The S7-1500 automation system/ET 200MP distributed I/O system fulfills the requirements of
the standards:
● AS/NZS 61000.6.4
● IEC 61000-6-4.
Korea Certification
KC registration number: KCC-REM-S49-S71500
Please note that this device corresponds to limit value class A in terms of the emission of
radio frequency interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
M arking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU).
IEC 61131
The S7-1500 automation system/ET 200MP distributed I/O system meets the requirements
and criteria of the standard IEC 61131-2
(programmable logic controllers, Part 2: Equipment requirements and tests).
PROFINET s tandard
The S7-1500 automation system/ET 200MP distributed I/O system is based on standard
IEC 61158 Type 10.
PROFIBUS standard
The S7-1500 automation system/ET 200MP distributed I/O system is based on standard
IEC 61158 Type 3.
Automation system
System Manual, 09/2016, A5E03461182-AD
Technical specifications
15.1 Standards and Approvals
237